FERROUS IN FOIL METAL DETECTOR

Please read in conjunction with our T & Cs. By placing a bid you are accepting these terms and our terms and conditions of sale. 

Bidders are reminded that It is the buyers responsibility to inspect potential purchases as to content reliability and suitability. Potential bidders who do not inspect lots prior to bidding do so at their own risk. Some images are for illustrative purposes only and are not necessarily included in the lot. Please read the descriptions carefully and if in doubt please check with the auctioneers for clarification. All measurements and descriptions have been prepared in good faith but should not be wholly relied upon. Vehicles/trailers will not have been checked for roadworthiness, it is the buyer responsibility to inspect these items and ensure that they comply with all regulations before taking them on the road. All goods are sold as seen. No refunds given under any circumstances. The Buyer acknowledges that a Sale by Auction is not a consumer sale for the purposes of the Sale of Goods Act 1979. It is the buyers responsibility to insure their goods at point of sale and in transit.

The Auctioneer reserves the right to remove equipment/rescind a transaction upon the instruction of the vendor.

For clarity of any points relating to this sale please contact the auctioneers Food Machinery 2000 Limited. Tel: 01373 831 373.

________________________________________________________________________ 

This is a genuine sale, everything must go!

Where possible additional photographs and video footage has been included in the description (best viewed using Google Chrome).

Please note that sometimes images show items that are not included in the lot, ie additional items to the lot are shown on top of or inside goods being offered for sale, for example on top of tables, shelves, racks etc., these items are not included in the lot unless specifically mentioned.  Please check with the auctioneers should you require clarification on this.

The majority of the equipment has come out working and been fully maintained.  However, it is the buyers responsibility to inspect the goods to ascertain condition, reliability and suitability of any lots.  All measurements and descriptions have been prepared in good faith but should not be wholly relied upon.

The equipment offered may be suitable for other applications in different sectors of the food industry.

SALIENT POINTS

Bidding starts from 9 AM ON WEDS 4 DECEMBER 2024

Auction closes from 12 NOON ON WEDS 11 DECEMBER 2024

Payment is due within 24 hours of the auction ending, or no later than MONDAY 16 DECEMBER 2024.

Fees:  

Buyers Premium rate: 12.5%

Internet Surcharge: 6%.

VAT is payable at the current rate of 20% and is payable on all goods/services provided.

INVOICING

Successful bidders will receive an invoice made out to the email/address registered on your Bidspotter account. If you wish to amend these details please do this on your Bidspotter account. If you wish us to amend any details on individual invoices this will incur a £25 administration fee. Invoices are issued at the end of the sale or by the next morning at the latest. Please contact Food Machinery 2000 if your invoice has not been received.

PAYMENT

All payments to be received no later than WITHIN 24 HOURS OF RECEIPT OF INVOICE. UNLESS OTHERWISE INDICATED – NO EXCEPTIONS!

NOTICE TO EXPORT PURCHASERS - PLEASE READ

Export customer's must declare their intention to export goods PRIOR TO BIDDING. Your bidspotter account should have up to date export information including your VAT number, if applicable. All export customers will be issued with a VAT invoice which is payable in full (NO EXCEPTIONS).  The VAT element excluding VAT on Buyers Premium will be refundable upon receipt of satisfactory proof of export providing this is received within 30 days from date of collection.  If proof of export is not received within this period the purchase will be treated as a UK sale and processed accordingly under HMRC guidelines and no VAT refund will be provided. Proof of export must be in the form of a Bill of Lading or certificate of shipment, these must include the invoice number and the lot numbers/descriptions/values of the lots purchased.

Please note that from point of sale it becomes the purchasers responsibility to insure their goods and ensure that all necessary customs paperwork/requirements are in place to facilitate import of your purchases. The vendor is not responsible for any VAT, duties, goods and services tax, or other sales or import taxes or duties arising on the exportation of the goods from the UK and the importation of the goods into any country by the Purchaser or their agent.  All overseas buyers are advised to engage the services of a freight forwarding agent, who should arrange and effect the appropriate export documentation. Food Machinery 2000 Ltd are unable to provide CE certificates, Technical Information, Export licences or T1 documents. Food Machinery 2000 Ltd will however provide a Commercial invoice detailing the goods purchased. It is the buyer’s responsibility to organise any special requirements, ie cleaning/packing of goods to meet your customs import standards.

In detail:

BIDDING starts to close from 12 noon on WEDS 11 DECEMBER 2024 starting with lot 1, each lot dropping off sequentially at  approx. 1 minute intervals. 

BIDS ARE SUBJECT TO STAGGERED TIMINGS AND THE TEN MINUTE RULE (The 10-Minute Rule refers to what happens when someone bids in the last ten minutes of an auction. If a bid is placed in the last ten minutes of an auction, the closing time of the auction is extended ten minutes).

COMBINATION LOTS

When lots are offered as part of a combination.

Accordingly your winning bid for individual items cannot be confirmed until the outcome of the combination lot has been determined. 

VIEWING

Remember it is the buyer's responsibility to satisfy themselves as to the condition and suitability of any purchases. Viewing is by appointment only please call 01373 831 373 to arrange your visit. Visitors to all sites are required to follow all health and safety procedures that may be in place and agree to accept fully responsibility for taking due care and attention during their visit to ensure their own safety.  Hi-Viz and safety shoes will be required.

COVID RESTRICTIONS

IN THE EVENT OF ANY COVID19 RESTRICTIONS BEING IN PLACE AT THE TIME OF ATTENDANCE TO THE SITE. ALL VISITORS MUST ADHERE TO THE RELEVANT GOVERNMENT RESTRICTIONS PUT IN PLACE. IN ADDITION, IF APPLICABLE, YOU WILL BE REQUIRED TO FOLLOW ANY GUIDELINES SET BY INDIVIDUAL SITES. THIS MAY FOR EXAMPLE MEAN WEARING A FACE MASK, USING HAND SANITISERS AND PRACTICING SOCIAL DISTANCING. STAGGERED VIEWING TIMES AND COLLECTIONS MAY BE IN PLACE TO AVOID CROWDS. 

COLLECTION DATES/FINAL CLEARANCE  

Once payment has been made dates for Final clearance WILL BE ADVISED. Please contact Food Machinery 2000 if you have not received this information.  

Goods are at risk if not collected by the said date. Collection dates are limited and need to be booked in via the auctioneers office Tel: 01373 831373. Bookings will be taken on a FIRST COME FIRST SERVED BASIS and  in accordance with access/item location within the factory starting with the smaller items to make room to disconnect larger equipment. COLLECTION IS BY APPOINTMENT ONLY. You will be provided with collection dates once payment has been received.  WARNING: Do not send in any transport unless it has been booked in and payment in full has been received.  Vehicles not booked in will be turned away. 

If any agreed collection date is not met, you may incur a No show/Cancellation charge. Please be aware that it is not always possible to offer an alternative date. Goods not picked up within the agreed collection period may incur a storage charge. If you have failed to collect your goods within 30 days without an agreement in place to store your items your goods will be deemed as being abandoned and will be disposed of by whatever means the auctioneers deems appropriate. 

REMOVAL

A lift out charge is apportioned to each lot, this covers loading onto your vehicle by our staff/contractors This charge is subject to auctioneers fees. Purchasers may not remove goods themselves unless the item is marked Buyer to Remove in which case removal is to be organised yourself.  See note below BTR.  You may however oversee disconnection/loading by arrangement. Extra charges apply for palletisation and loading into a container.  

Where pallets are available it is possible to provide a pallet and secure your goods to the pallet for an additional fee of £15 per pallet.  This is payable in advance of your collection. We cannot however guarantee availability of pallets.

BTR – Items marked BTR are “Buyer To Remove”.  Removal must be booked in through Food Machinery 2000.  You or your contractors carrying out this removal will be required to provide Risk Assessment Method Statement (RAMS) which should take into consideration leaving the site in a clean and safe condition and any structural work or damage created during this removal is to be made good. All RAMS/Method Statements must be approved by the site owners prior to removal taking place. 

THIRD PARTY EQUIPMENT: Please note that Food Machinery 2000 reserve the right to include third party equipment in some auctions at their discretion.  This equipment can include equipment from bank/finance repossession and may be located at an alternative address to the auction site.  In most cases the location details will be provided in the auction catalogue. Please see individual lots for item location.

• Please be aware:
• All collections must be booked in through this office, do not contact the site direct. Do not attend site without a confirmed appointment or your vehicle will be turned away.
• It is the buyer’s responsibility to insure their goods at point of sale and during transit. This includes organised deliveries/free delivery offers.
• Please quote your invoice number in all communications, written and verbal - Your driver will need to quote this number on arrival to site or your collection may be delayed.
• It is the buyer’s responsibility to send in suitable transport and you should ensure that vehicles have sufficient straps to secure equipment for transportation. 
• If you are organising a pallet collection please ensure that you have checked the item is on a pallet (this may be at additional cost) and that the pallet company will secure the load to the pallet. (Pallet collections can only be booked in on days when our site contractors are on site all day). It is especially important that you advise your Pallet company of the open/closing times on site when booking this in as they are notorious for arriving late and then charging clients for an aborted collection - Please also ensure that they are given your invoice number/customer name as we may have several pallet companies attending site on the same day. 
• It is also the buyer’s responsibility to send in the correct size vehicle.  We appreciate that it may be difficult to judge vehicle space, however, where vehicles are sent in that are clearly not suitable/large enough to load the machinery purchased, there may be a £100 fee to cover staff/resources in getting equipment out ready for a booked collection, moving equipment out of the way for other collections, and then pulling equipment out again at a future date.
• Please advise in good time if you cannot attend your pre booked collection date. This is so we can fill this slot with another collection. Non attendance of a pre booked appointment without advising this office may incur a £100 cancellation fee. Please let us know if your vehicle is delayed or you are unable to make your appointment so we can try and reschedule you. 
• Your goods are at risk if you do not attend your pre booked appointment and in some circumstances alternative dates may not be available. If you do not collect your goods within the agreed time frame without a written arrangement your goods will be deemed as abandoned and disposed of accordingly.
• Please ensure that your driver checks that he has picked up all of your consignment. Missing items should be reported to this office  immediately so that the site can investigate prior to the transport leaving.
• Your lift out charge covers disconnection and loading onto your transport. BTR (Buyer to Remove) items require you to organise disconnection and loading.  RISK ASSESSMENTS AND METHOD STATEMENTS will be required prior to removal of any BTR items.
• Some goods may be at multiple collection sites, please check your purchase for details.
• If you have purchased Vehicles/trailers etc., these will not have been checked for roadworthiness, it is the buyers responsibility to inspect these items and ensure that they comply with all regulations before taking them on the road.
• By bidding on our auction you have accepted the above and our terms and conditions shown below.

FREE DELIVERY - On occasions Free Delivery is offered.  If this is the case it will be clearly stipulated and conditions will apply:

IF YOU HAVE QUALIFIED FOR FREE DELIVERY this will be made to the invoice address provided on Bidspotter unless you have advised in writing an alternative address. Free delivery covers deliveries to a UK Mainland Company address only.  Conditions apply. Deliveries will take place during standard working hours ONLY ie. 8.30 am and 5.30 pm Monday to Friday.  We are unable to book specific dates/times for your delivery.